3D printing Problems

Everything else here.
Post Reply
User avatar
iDig3Dprinting
Posts: 154
Joined: Thu Jan 29, 2015 5:04 pm
Location: Stroud, UK
Been thanked: 4 times
Contact:

3D printing Problems

Post by iDig3Dprinting » Thu Jan 29, 2015 6:25 pm

I am interested to know what problems people regard as being the most irritating about 3D printing, whether it is problems to do with using the printer, problems with using software or with materials. Also If something needed to be changed about the way 3D printing process currently operated what would people like to see changed?


iDig3DPrinting
http://www.iDig3Dprinting.co.uk
Your source for 3D printers, 3D printing accessories and filament.

User avatar
oklok
Posts: 6
Joined: Tue Jun 17, 2014 11:21 am
Location: Sweden
Contact:

Re: 3D printing Problems

Post by oklok » Mon Feb 16, 2015 12:58 pm

nozzle jamming i nr 1 problem especially with Woodfill! :?


http://www.3dfilamenta.com - Affordable filaments

User avatar
iDig3Dprinting
Posts: 154
Joined: Thu Jan 29, 2015 5:04 pm
Location: Stroud, UK
Been thanked: 4 times
Contact:

Re: 3D printing Problems

Post by iDig3Dprinting » Mon Feb 16, 2015 7:49 pm

oklok wrote:nozzle jamming i nr 1 problem especially with Woodfill! :?
So if nozzle blockages are your main gripe with 3D printing how do you think this problem can be eleviated?


iDig3DPrinting
http://www.iDig3Dprinting.co.uk
Your source for 3D printers, 3D printing accessories and filament.

Post Reply