Page 1 of 1
3D Print quote?
Posted: Fri Nov 25, 2016 6:49 pm
by Noel33NI
Interested in getting this part made
It's roughly 5cm x 5cm x 1cm with a 6mm hole in the middle. It can be cheap PLA or whatever but I made it
with just a 1mm wall, I gather it might need to be a bit thicker than that but if someone can quote me, that
would be nice + p&p to Belfast.
Cheers
Noel.
Re: 3D Print quote?
Posted: Mon Nov 28, 2016 12:25 pm
by iDig3Dprinting
Is this for a functional part or as a prototype proof of concept model?
Re: 3D Print quote?
Posted: Mon Nov 28, 2016 4:54 pm
by Noel33NI
It could be described I suppose as a short term functioning part
Re: 3D Print quote?
Posted: Tue Nov 29, 2016 9:51 am
by iDig3Dprinting
Noel33NI wrote:It could be described I suppose as a short term functioning part
Hi,
SO for a quote you typically need to supply the .STL file or 3D model file so that time to print and materials used can be calculated. Typically, we have £9.60 set up fee + £0.48p per meter, with minimum charge of £15.00 for an order. P&P is calculated on weight and volume so me need a file for this. If the file is particularly tricky to print we may change the pricing as that usually infers more set up costs. We can't say anything for sure without looking at the file.
Best regards,
Colin