Interested in getting this part made
It's roughly 5cm x 5cm x 1cm with a 6mm hole in the middle. It can be cheap PLA or whatever but I made it
with just a 1mm wall, I gather it might need to be a bit thicker than that but if someone can quote me, that
would be nice + p&p to Belfast.
Cheers
Noel.
3D Print quote?
Moderator: CrazyIvan
- iDig3Dprinting
- Posts: 192
- Joined: Thu Jan 29, 2015 5:04 pm
- Location: Stroud, UK
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
Re: 3D Print quote?
Is this for a functional part or as a prototype proof of concept model?
iDig3DPrinting -
Your source for 3D printers, 3D printing accessories and filament.
Your source for 3D printers, 3D printing accessories and filament.
- iDig3Dprinting
- Posts: 192
- Joined: Thu Jan 29, 2015 5:04 pm
- Location: Stroud, UK
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
Re: 3D Print quote?
Hi,Noel33NI wrote:It could be described I suppose as a short term functioning part
SO for a quote you typically need to supply the .STL file or 3D model file so that time to print and materials used can be calculated. Typically, we have £9.60 set up fee + £0.48p per meter, with minimum charge of £15.00 for an order. P&P is calculated on weight and volume so me need a file for this. If the file is particularly tricky to print we may change the pricing as that usually infers more set up costs. We can't say anything for sure without looking at the file.
Best regards,
Colin
iDig3DPrinting -
Your source for 3D printers, 3D printing accessories and filament.
Your source for 3D printers, 3D printing accessories and filament.