No power to 3d printer please help

General discussion on 3D hardware from beginner to expert.
Post Reply
Rob23
Posts: 1
Joined: Mon Mar 05, 2018 3:59 pm

No power to 3d printer please help

Post by Rob23 » Mon Mar 05, 2018 4:11 pm

Hi, I'm new to this forum and 3d printing. I recently bought a replica pursa i3 and assembled it correctly (I thought), when I first switched it on it immediately blew the fuse in the power switch. I then used a new power supply and wired everything correctly with a new 8amp 20mm glass fuse, now the lcd will light up but only when the usb is connected, I can heat the bed up with the options on the usb but I can't get any power at all using the plug socket, when I do plug it in and switch it on I get a green light on the power supply and audrino board but nothing powers up. Any help would be greatly appreciated



User avatar
iDig3Dprinting
Posts: 160
Joined: Thu Jan 29, 2015 5:04 pm
Location: Stroud, UK
Been thanked: 4 times
Contact:

Re: No power to 3d printer please help

Post by iDig3Dprinting » Thu Mar 08, 2018 10:30 am

if you power it up and connect it to your computer via usb can you connect to the printer and print?


iDig3DPrinting
http://www.iDig3Dprinting.co.uk
Your source for 3D printers, 3D printing accessories and filament.

steve3dprinters
Posts: 14
Joined: Tue Mar 20, 2018 4:26 am

Re: No power to 3d printer please help

Post by steve3dprinters » Tue Mar 20, 2018 4:29 am

There could be some errors in the setting and calibration of the 3D printer. All you need to do is consult the user manual of your 3D printer and match the settings to know the exact fault.
And if possible, try getting help from the place you got your 3D printer.

https://www.3dprintersbay.com/



Post Reply