Peoples scanner experiences

Discuss hardware scanning devices.
Post Reply
User avatar
iDig3Dprinting
Posts: 157
Joined: Thu Jan 29, 2015 5:04 pm
Location: Stroud, UK
Been thanked: 4 times
Contact:

Peoples scanner experiences

Post by iDig3Dprinting » Tue Feb 03, 2015 10:59 am

So this is a simple thread for this forum topic. Why not tell us about your 3D scanner experiences. We only know about 3D systems Sense and iSense 3D scanner as these are the models that we sell. Their seems to be a new kid on the block in the form of the Fuel3D at the moment which looked good at the TCT show at the NEC in 2014.

So what not tell us about your experiences?


iDig3DPrinting
http://www.iDig3Dprinting.co.uk
Your source for 3D printers, 3D printing accessories and filament.

User avatar
oklok
Posts: 6
Joined: Tue Jun 17, 2014 11:21 am
Location: Sweden
Contact:

Re: Peoples scanner experiences

Post by oklok » Mon Feb 16, 2015 12:57 pm

Most scanners are currently quite ok unless you are into industrials scanners.


http://www.3dfilamenta.com - Affordable filaments

User avatar
iDig3Dprinting
Posts: 157
Joined: Thu Jan 29, 2015 5:04 pm
Location: Stroud, UK
Been thanked: 4 times
Contact:

Re: Peoples scanner experiences

Post by iDig3Dprinting » Mon Feb 16, 2015 7:50 pm

oklok wrote:...unless you are into industrials scanners.
what about industrial 3D scanners, do you not think that they are OK. Obviously expensive though.


iDig3DPrinting
http://www.iDig3Dprinting.co.uk
Your source for 3D printers, 3D printing accessories and filament.

User avatar
3DexLtd
Posts: 14
Joined: Wed Dec 02, 2015 8:16 pm

Re: Peoples scanner experiences

Post by 3DexLtd » Fri Jan 29, 2016 8:05 pm

We have not experienced scanners greatly.

Generally very expensive and sometimes not very accurate.


Cheers,
www.3dexfilament.co.uk



Post Reply