AmeraLabs Resin Manufacturer (Introduction)

All things relating to the materials used with 3D printers.
Post Reply
AmeraLabs
Posts: 1
Joined: Thu Jun 28, 2018 9:18 am

AmeraLabs Resin Manufacturer (Introduction)

Post by AmeraLabs »

Hi to all community members!

I would like to introduce myself. I'm one of the founders of AmeraLabs - producer of 3D printing resins. Here's our website: https://ameralabs.com

We have been in 3D printing for several years now. Spent first 3-5 years in FDM printing, and few years ago switched to resin 3D printing and formulated our first few resin materials. We have built several custom 3D printers for ourselves and for testing of our resins. Basically, we are a group of geeks that are crazy about chemistry and 3D printing with plenty of experience. If you have any questions, or you need an advice - feel free to drop as a message!

We are based in Lithuania (EU), but we ship our materials to UK daily. So for anyone who would like to try them out - do not hesitate to take a sample.

I hope we can contribute to this community.

Here are some pics of things printed with our resins:
Image
Image
Image
Image



Skybound
Posts: 1
Joined: Mon Jan 27, 2020 3:13 pm

Re: AmeraLabs Resin Manufacturer (Introduction)

Post by Skybound »

When are we going to see resins that are dedicated to final use production to bridge the gap between low volume production of injection moulded parts?

Since the dawn of 3D printing companies were stating that we would be printing out replacement parts around the home and alike, however, we are still not there yet.

I would like to print items that I could use without the fear of them failing or poor finish quality.



Post Reply