Vertical Z axis print Strength

Get help on your object. Also the place to share objects for free or just show off your design.
Post Reply
NittyNight
Posts: 2
Joined: Fri Oct 09, 2020 8:31 pm

Vertical Z axis print Strength

Post by NittyNight »

Hi all, A bit of a Newbie here. I have grips on the freecad software and to a fair degree Cura. A couple of my designs (A biscuit cutter and a food can cap) have problems when printed. The layers (Z axis layers) are 'Weak' and either snap off or break / tear away. I am using a Monoprice MP Select Mini 3 Printer with Sunlu filament with a Nozzle temp of 200C and a bed temp of 45-50C. Any help in getting vertical strength will be gratefully appreciated thank you.



Post Reply