Hi,
THE BEST TEST THERE IS....
I have a HIGH END arguably one of the best if not the best calibration file tiles, 45x45 x3mm called SR6
designed to show up which printer is best at fine detail for CAD models.
Elegoo are sending prints of it, anti alias and non anti alias, as a R_E_R_F file test.
Ditto Uniformation.
all keen to show theirs is the best.
I need to find someone with an AnyCubic Mono X 6Ks to show what that machine can do.
We have printed it on the 6K and it has a problem. it can't do the raised detail and the sunken detail on the same exposure. Its got lovely sharp edges, the best of the three makes so far, BUT fills in holes and sunken lines and text ! I am told the 6Ks is better. Is it ?
Who is willing to see what is the best setting for their machine , by doing a R_E_R_F file test with SR6, and send me the result in the post. I will pay all fees, pre-agreed of course ! ( I am UK)
This is A VERY IMPORTANT test for me, as we can then decide what machine to get.
I had considered the M7 but that heat pump and resin topup pump are a pain to clean out and fit to any bottle.
There is no browse attach image method here, unlike other forums, so unable to show you what SR6 looks like.
With an email I can do proper comms ! send me a PM.
So who can help, who wants to see what their 6Ks is capable of and what its best setting should be, as this file will show that !
Cheers
DBenz
An Any Cubic Mono 6KS user is wanted to print SR6 best calib file there is.
Moderator: CrazyIvan