Look for the print settings in the manual you got with the 3D printer. Otherwise, you can easily find the settings to the 3D printer online, or get assistance from the store which delivered you the 3D printer.
https://www.3dprintersonlinestore.com/
noob struggling to get started
Moderator: CrazyIvan
-
- Posts: 25
- Joined: Thu Mar 15, 2018 10:31 am
- Been thanked: 1 time
-
- Posts: 24
- Joined: Tue Mar 20, 2018 4:26 am
Re: noob struggling to get started
Have a look at the link https://ultimaker.com/en/resources/3568 ... ing-models which offers you all the information relating Cura and how to load a model into it to initiate your 3D printing jobs.
Re: noob struggling to get started
You may find that YouTube is your friend. There are many videos on there for just about everything so it's worth a look.
Go to youtube.com, and search for your printer type.
Go to youtube.com, and search for your printer type.
Creality CR-10S owner posting as a private individual.
-
- Posts: 24
- Joined: Tue Mar 20, 2018 4:26 am
Re: noob struggling to get started
First of all, get a print manual for the 3D printer and see if you did everything in order. If it’s set to go, the manual would also provide you instructions relating the movement and operation of the 3D printer and even about loading a model into the Cura.